Belt Finishing
Automotive Troubleshooting
Problem Possible Causes Suggested Correction
Poor surface finish Coarse grit size
Loading		 Try finer grit size
Clean with wire brush
Reverse belt direction
No cutting action or slow cutting Belt worn out
Loading
Fine grit size		 Replace belt with coarser grit
Clean with wire brush
Reverse belt direction

 

 
< Prev   Next >

New to Site

Tyrolit Literature is now available in PDF format on radiac.com. Click here or go to the Support tab for all available Literature, Catalogs, and MSDS Sheets.

Share this site!

| More

Search This Site
© 2012 Radiac Abrasives Inc. | Site by Owl Watch